道默 PA66 66G15H

15%玻纤增强级

📋 产品简介

产品名称	道默 Domamid PA66 66G15H
品牌厂商	道默 Domamid
产品型号	66G15H
材料类型	PA66 聚酰胺66 · 15%玻纤增强级
核心特点	15%GF增强，平衡刚性和韧性
品牌介绍	道默化学(DOMO Chemicals)是欧洲领先的PA66聚酰胺生产商，Domamid系列覆盖未填充、玻纤增强、矿物填充、阻燃等全系列PA66牌号，以高品质和技术服务著称。

💪

高强度

拉伸强度105MPa，弯曲模量5GPa

🔥

优异耐热

HDT>200°C，PA66耐热等级

🛡️

UL94 HB

标准阻燃等级

🧪

耐化学品

耐油耐溶剂，优异耐疲劳性

📐

尺寸精密

密度1.28g/cm³，优异尺寸稳定性

🔧

易加工

良好的注塑/挤出加工性，高生产效率

🚗

电子外壳

⚡

工业零件

🏭

扎带

🏭 道默 Domamid · PA66 66G15H · 15%玻纤增强级

数据来源：道默 Domamid官方技术资料

干燥建议：PA66吸湿性强，必须充分干燥，否则制品易出现气泡、银纹，力学性能下降。建议使用除湿干燥机。

推荐干燥温度 80~100°C，干燥时间 4~6小时，含水率控制在 < 0.1% 以下。

注意事项：PA66熔点较高(约260°C)，加工温度需高于PA6；玻纤增强级加工温度可提高10~20°C；成型收缩率受玻纤含量影响较大。
* 以上参数为 PA66（尼龙66）通用参考范围，实际参数需结合具体牌号、制品结构、模具设计和设备条件进行试模验证。

If you have any questions about Daomo PA66 66G15H 15% Glass Fiber Reinforced Grade Polyamide, or would like to request Daomo PA66 66G15H 15% Glass Fiber Reinforced Grade Polyamide datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Daomo PA66 66G15H 15% Glass Fiber Reinforced Grade Polyamide Properties, Daomo PA66 66G15H 15% Glass Fiber Reinforced Grade Polyamide Product Parameters, Daomo PA66 66G15H 15% Glass Fiber Reinforced Grade Polyamide Performance Data, Daomo PA66 66G15H 15% Glass Fiber Reinforced Grade Polyamide Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA