Huntsman ARADUR 3275 Modified Amine Curing Agent, Elastic Adhesive, Sealant, Elastic Flooring - Product Center - 星空官网入口

Product Details

Basic Parameters

一、基本参数与技术规格

产品牌号	ARADUR 3275
生产厂家	亨斯迈(Huntsman)
化学类型	改性胺
活性氢当量(AHEW)	250 g/eq
胺值	100-170 mg KOH/g
粘度(25°C)	200-300 mPa·s
凝胶时间(25°C)	86 min
外观	浅黄色透明液体
包装规格	190kg/桶
保质期	24个月

二、产品核心特点

固化物极度柔韧
弹性好，可承受变形和振动
长适用期(86分钟)

三、典型应用领域

弹性环氧胶粘剂
弹性密封胶
弹性地坪(运动场地)
减震缓冲灌封

四、加工使用建议

推荐配比：与GY 250约130-140 phr
固化条件：常温24h或60°C/4h

五、关键性能数据

性能指标	数据
AHEW	250 g/eq
胺值	100-170 mg KOH/g
粘度(25°C)	200-300 mPa·s
凝胶时间	86 min

六、包装、储存与安全

密封保存，5-35°C

使用前请仔细阅读产品安全数据表(MSDS)，做好个人防护。

七、企业资质与售后服务

上海道勤实业有限公司专业供应亨斯迈(Huntsman)全系列化工产品，产品涵盖SUPRASEC MDI、JEFFAMINE聚醚胺、ARALDITE环氧树脂、ARADUR固化剂、IROGRAN/AVALON TPU等。所有产品均为亨斯迈原厂正品，可提供原厂TDS和MSDS。

联系电话：19279864570（微信同号）
网址：daoqinsh.com

If you have any questions about Huntsman ARADUR 3275 Modified Amine Curing Agent, Elastic Adhesive, Sealant, Elastic Flooring, or would like to request Huntsman ARADUR 3275 Modified Amine Curing Agent, Elastic Adhesive, Sealant, Elastic Flooring datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Huntsman ARADUR 3275 Modified Amine Curing Agent, Elastic Adhesive, Sealant, Elastic Flooring Properties, Huntsman ARADUR 3275 Modified Amine Curing Agent, Elastic Adhesive, Sealant, Elastic Flooring Product Parameters, Huntsman ARADUR 3275 Modified Amine Curing Agent, Elastic Adhesive, Sealant, Elastic Flooring Performance Data, Huntsman ARADUR 3275 Modified Amine Curing Agent, Elastic Adhesive, Sealant, Elastic Flooring Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA