DuPont Minlon 32C1 PA66 Polyamide 45% Mineral Filled PA66 Ultra High Rigidity Grade - Product Center - 星空官网入口

Minlon 32C1 — PA66 聚酰胺

杜邦 DuPont | 高性能工程塑料

产品牌号Minlon 32C1

产品系列Minlon

材料类型PA66 聚酰胺

增强/填充45%矿物填充

产品级别PA66超高刚性级

生产厂家杜邦 DuPont

45%矿物填充增强PA66

超高刚性和硬度

极低翘曲变形

尺寸精度极高

适合高精度配合件

超高刚性件

精密配合件

工业高精度配件

低翘曲框架

干燥建议：80~90°C / 4~8小时 / <0.2%

注意事项：PA66吸湿性强，必须充分干燥(含水率<0.2%)；结晶速率快，模温对结晶度和性能影响大。
* 以上参数为通用参考范围，实际参数需结合具体牌号和模具试模验证。

产品资质：杜邦 DuPont Minlon 系列PA66 聚酰胺，可根据项目需求提供 TDS 技术资料、SDS 安全资料及原厂技术支持。

环保声明：符合欧盟 RoHS、REACH 法规要求，适用于工业制品生产。

免责声明：以上物性数据基于公开资料和典型应用经验，实际应用请结合具体配方和工艺进行验证。更多产品型号请联系 daoqinsh.com | 数据仅供参考，以原厂最新 TDS 为准。

If you have any questions about DuPont Minlon 32C1 PA66 Polyamide 45% Mineral Filled PA66 Ultra High Rigidity Grade, or would like to request DuPont Minlon 32C1 PA66 Polyamide 45% Mineral Filled PA66 Ultra High Rigidity Grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

DuPont Minlon 32C1 PA66 Polyamide 45% Mineral Filled PA66 Ultra High Rigidity Grade Properties, DuPont Minlon 32C1 PA66 Polyamide 45% Mineral Filled PA66 Ultra High Rigidity Grade Product Parameters, DuPont Minlon 32C1 PA66 Polyamide 45% Mineral Filled PA66 Ultra High Rigidity Grade Performance Data, DuPont Minlon 32C1 PA66 Polyamide 45% Mineral Filled PA66 Ultra High Rigidity Grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA